Custom Flanges
Texas Flange manufactures custom flanges to print, from 1/2 inch clear through 203″, for oil and gas, petrochemical, and water transmission service. Non-standard bores, custom faces, drilled or threaded bolt holes and non-stock material grades are made to order, with no minimum quantity: one piece is a real order, I tell you what. Mill test reports (MTRs) are available.
Large diameter flanges|CAD and 3D drawings
Just send that OD, ID, thickness, bolt pattern, and material grade on over to sales@texasflange.com or give us a ring at 281-484-8325 for a quote right quick.
Does Texas Flange do Custom Flanges?
We get a heap of calls askin' for large blind flanges, usually followed by folks askin', “can y'all bore that out to X for me?”. What a lot of them engineers, estimators, and purchasin' agents might not realize is just how easy it is to get a custom flange right here from Texas Flange.
For a custom ring flange, all we need is the OD, ID, thickness, bolt pattern, and grade of material. Get us that information, and we can quote for as few as ONE piece – yessir, there ain't no minimum quantity even on customs (though large quantities will of course receive discounts due to set up costs bein' distributed more widely).
Here’s a base flange template dat a whole lot of our customers have used for reference. Give us a call or shoot us an email to talk 'bout your flange application, and we'll send y'all the right template to use:
We also provide custom flange templates for y'all to tweak to your likin' so you can get a better handle on your application.
Y'all can also ask for drawings to approve before we start the actual machinin', long as you already got an order in with us.
This gives y'all a chance to have one last look at your incomin' product before we throw your forgin' onto the machines.
Now anybody can hand over standard commodity B16.5 flanges, but not ever' one can make 'em in small batches with a quick turn-around when y'all need somethin' tweaked past the usual industry requirements, I tell you what.
Dat’s where Texas Flange comes in. Non-stock material grades, custom faces, or threaded bolt holes? We like to say dat specials are our specialty down here! We're here to help y'all hit dem project deadlines right on time.
Even though we don't directly design custom flanges, we sure do provide custom flanges made right to your requirements. We don't always have a standard to look at if your job ain't to ASME code, so we gotta confirm every one of dem dimensions with y'all.
When y'all order a custom flange, please show all dem details or requirements to our sales folks so we can make sure your quote is dead-on accurate.
Precision Custom Flanges Made Simple
Products
Texas Flange stocks a wide variety of flanges in all sizes and specifications, yessir.
ANSI Flanges
ASME Flanges
AWWA Flanges
Pipe Flanges
Industrial Flanges
Oil & Gas Industry Flanges
Custom Flanges
Petrochemical Flanges
Texas Waterworks Flanges
Ring Joint Flanges
Large Industry Standard Flanges
Metric System Flanges
Plumbin' And Mechanical Industries Flanges
Industrial Pumps, Valves And Vessels
Manufacturin' Industries Flanges
Heating Systems Industries Flanges
Flange Food And Beverage Industries Flanges
Questions Folks Ask Us (FAQs)
Now, FF (Flat Face) and RF (Raised Face) flanges, dat just refers to the type of sealin' surface you got on the flange. An FF flange got a flat surface clear across the whole face, makin' it mighty fine for jobs where your gasket seating needs to be fully flush, yessir.
Dese are often used in low-pressure applications. An RF flange got a raised surface around the bore, which helps concentrate gasket compression for a better seal, makin' it more common in high-pressure and high-temperature applications.
